 |
bearing for mining |
10,22,2016 |
|
bearing in mining |
10,22,2016 |
|
bearing of mining |
10,22,2016 |
|
mining bearing |
10,22,2016 |
|
mining bearing |
10,22,2016 |
|
mining bearing |
10,22,2016 |
|
bearing for mining drum |
10,21,2016 |
|
bearing for mining drum |
10,21,2016 |
|
bearing for mining drum pulley |
10,21,2016 |
|
bearing for mining pulley |
10,21,2016 |
|
| Current Location：Home
- News |
0 class deep groove ball bearing storage and storage should pay attention to what points
|
| Time：2016.10.22 News Sources：Shandong Xinkaite bearing Co.,Ltd. Views：
|
Cots are rubber products, 0 class deep groove ball bearing its storage and storage should pay attention to a few points in this do a detailed finishing.
1, you must first use the box out of the box to use up the tape to seal the mouth with a tape, to avoid direct exposure to the air, aggravating the aging roller;
2, rubber products, storage period can not be too long, generally not more than a year. So when the purchase to be aware of, not blindly purchase, how much to buy how much.
3, storage to moisture, oil, heat, anti-acid, etc., to prevent cracking, aging, swelling affect the use of performance;
4, the production of good rubber roller temporarily do not have to use thick cloth covered, not long-term direct exposure to the outside, to prevent the formation of "yin and yang side."
Be sure to master the aluminum liner rubber roller sets of poor, pay attention to choose the size of their matching roller bearings, pay attention to select the surface of the groove roller bearings should be shallow trench thread. And do a good job of cleaning roller bearings and sets of beds in the first adjustment of the preparatory work.
Usually the production steps are: roller bearings → picky → petrol cleaning → cover → set → refueling → oiling, cleaning → grinding → place 24h → → use a month after the stereotypes back to normal wear back → → back grinding.
|
|
|
