 |
bearing for mining |
10,22,2016 |
|
bearing in mining |
10,22,2016 |
|
bearing of mining |
10,22,2016 |
|
mining bearing |
10,22,2016 |
|
mining bearing |
10,22,2016 |
|
mining bearing |
10,22,2016 |
|
bearing for mining drum |
10,21,2016 |
|
bearing for mining drum |
10,21,2016 |
|
bearing for mining drum pulley |
10,21,2016 |
|
bearing for mining pulley |
10,21,2016 |
|
| Current Location：Home
- News |
The track and load of bearing
|
| Time：2016.10.24 News Sources：Shandong Xinkaite bearing Co.,Ltd. Views：
|
Roller bearing bearing a rotation, the inner ring and outer ring raceway surface, rolling contact with the rolling body, so the running track is dark, running track attached to the raceway surface is not unusual, which can be learned Load conditions, so remove the bearings in the case, please pay attention to observe and observe the raceway surface trajectory.
If the trajectory is carefully observed, it is known that only a radial load is applied, a large axial load is applied, a moment load is applied, or there is an extreme rigidity in the bearing housing. You can check whether the bearing with the accidental load and installation error is too large, etc., and become a cause of bearing damage to the clues. Out of the deep groove ball bearing the merits of the different load conditions produced by the trajectory.
|
|
|
